Creare una VPN con ssh 4.3

Utilizzando sshuttle

Si può utilizare

apt-get install sshuttle

sshuttle -r root@server.example.com 0/0

Riferimenti

sshuttle/sshuttle: Transparent proxy server that works as a poor man's VPN. Forwards over ssh. Doesn't require admin. Works with Linux and MacOS. Supports DNS tunneling.

Utilizzando uno script

The following script will let you start a full featured VPN using SSH and tun:

#!/sbin/sh
HOST=your.web.server
TUN_LOCAL=0
TUN_REMOTE=1
IP_LOCAL=192.168.2.2
IP_REMOTE=192.168.2.1
IP_MASK=24
PRIVATE_NETWORK=10.0.0.0/8
PRIVATE_DOMAIN="your.private.domain private.domain"
PRIVATE_NAMESERVER=192.168.2.1
PRIVATE_LOCAL=10.0.1.2

echo "Starting VPN tunnel ..."
modprobe tun
ssh -w ${TUN_LOCAL}:${TUN_REMOTE} -f ${HOST} "\
	ip addr add ${IP_REMOTE}/${IP_MASK} dev tun${TUN_REMOTE} \
	&& ip link set tun${TUN_REMOTE} up \
	&& iptables -t nat -I POSTROUTING -s ${IP_LOCAL} -j SNAT --to ${PRIVATE_LOCAL} \
	&& iptables -t nat -I PREROUTING -d ${PRIVATE_LOCAL} -j DNAT --to ${IP_LOCAL} \
	&& iptables -I INPUT -i tun${TUN_REMOTE} -j ACCEPT \
	&& iptables -I FORWARD -i tun${TUN_REMOTE} -j ACCEPT \
	&& iptables -t nat -I PREROUTING -i tun${TUN_REMOTE} -j ACCEPT \
	&& true"
sleep 3
ip addr add ${IP_LOCAL}/${IP_MASK} dev tun0
ip link set tun${TUN_LOCAL} up
ip route add ${PRIVATE_NETWORK} dev tun${TUN_LOCAL}
echo "search ${PRIVATE_DOMAIN}
nameserver ${PRIVATE_NAMESERVER}
" >/etc/resolv.conf
echo "... done."

• The following configuration can be set at the beginning of the script:

Item	Description
HOST	Hostname of the remote SSH server (either IP or DNS name).
TUN_LOCAL	Number of local tun interface. You cannot use ‘any’.
TUN_REMOTE	Number of remote tun interface. You cannot use ‘any’.
IP_LOCAL	IP address of local tun interface.
IP_REMOTE	IP address of server tun interface.
IP_MASK	IP address mask of the tuns.
PRIVATE_NETWORK	Network specification (any of its IP addresses and mask) of the private network.
PRIVATE_DOMAIN	Space delimiteed list of domain names of the private network (if any).
PRIVATE_NAMESERVER	Nameserver in the private network.
PRIVATE_LOCAL	IP address in the private network that uses this computer (in order to allow access from the private network).

• TODO: Convert to init.d script (ie. create stop script), detect failure, on close clear the server’s iptables and restore local /etc/resolv.conf’.

Riferimenti

• http://gentoo-wiki.com/HOWTO_VPN_over_SSH_and_tun