sudo apt-get install hddtemp
- Far loggare ogni 60 secondi:
┌─────────────────────────┤ Configuring hddtemp ├─────────────────────────┐
│ The temperature of the hard drive(s) can be logged by hddtemp via the │
│ generic system logging interface. │
│ │
│ Please enter a value in seconds corresponding to the interval between │
│ two checks. To disable this feature, enter 0. │
│ │
│ Interval between hard drive temperature checks: │
│ │
│ 60_____________________________________________________________________ │
│ │
│ <Ok> │
│ │
└─────────────────────────────────────────────────────────────────────────┘
sudo invoke-rc.d hddtemp restart
- Verificare che rilevi tutti i dischi:
Starting disk temperature monitoring daemon: hddtemp: /dev/sda /dev/sdb.
- Se così non fosse, identificare la label del disco con
sudo smartctl -i /dev/sda | grep "Device Model"
Device Model: ST380013AS
- Identificare la descrizione:
sudo smartctl -i /dev/sda | grep "Model Family"
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
- Verificare il numero dell'attributo SMART che logga la temperatura:
sudo smartctl -a /dev/sda| grep -i temp
194 Temperature_Celsius 0x0022 024 047 000 Old_age Always - 24 (0 15 0 0)
- Inserirlo nel DB hddtemp:
sudoedit /etc/hddtemp.db
"ST380013AS" 194 C "Seagate Barracuda 7200.7 and 7200.7 Plus family"
sudo invoke-rc.d hddtemp restart