Installazione di Proxmox in Debian

From RVM Wiki
Jump to navigation Jump to search

Introduction

In some case it makes sense to install Proxmox VE on top of a running Debian Wheezy 64-bit

For this HowTO the following Debian Wheezy ISO was used: debian-7.4.0-amd64-netinst.iso.

Suggested partition layout with LVM: 

Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1         122      975872   83  Linux
/dev/sda2             122        5222    40965120   8e  Linux LVM

LVM: 

 LV   VG   Attr   LSize  Origin Snap%  Move Log Copy%  Convert
 data pve  -wi-ao 30.69g 
 root pve  -wi-ao  3.72g 
 swap pve  -wi-ao  1.86g

We recommend to use ext3 filesystem for best OpenVZ performance and stability.

Install a standard Debian Wheezy (amd64)


  • Check /etc/hosts

Note: Make sure that no IPv6 address for your hostname is specified in /etc/hosts 

sudoedit /etc/hosts

127.0.0.1 localhost.localdomain localhost
192.168.6.177 proxmox-6-177.proxmox.com proxmox-6-177 pvelocalhost
  1. The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

Install Proxmox VE

Adapt your sources.list

Adapt your sources.list and add the Proxmox VE repository: 

sudoedit /etc/apt/sources.list
# Standard wheezy repos
deb http://ftp.it.debian.org/debian/    wheezy          main contrib non-free
deb http://ftp.it.debian.org/debian/    wheezy-updates  main contrib non-free
deb http://security.debian.org/         wheezy/updates  main contrib non-free

# PVE pve-no-subscription repository provided by proxmox.com, NOT recommended for production use
deb http://download.proxmox.com/debian wheezy pve-no-subscription


Add the Proxmox VE repository key: 

wget -O- "http://download.proxmox.com/debian/key.asc" | sudo apt-key add -

Update your repository and system by running: 

sudo apt-get update && sudo apt-get dist-upgrade

Install Proxmox VE Kernel

sudo apt-get install pve-firmware pve-kernel-2.6.32-31-pve

Optional - install Kernel headers: 

sudo apt-get install pve-headers-2.6.32-31-pve


cat /boot/grub/grub.cfg | grep menuentry | cut -f 2 --delimiter="'"

sudoedit /etc/default/grub

GRUB_DEFAULT="Debian GNU/Linux, with Linux 2.6.32-31-pve"

sudo update-grub
  • Reboot: Now restart the system using the Proxmox VE kernel.
  • Remove the Debian kernel:
sudo apt-get remove --purge linux-image-amd64 linux-image-3.2.0-4-amd64 linux-base
  • Check grub2 config by running:
sudo update-grub

Install Proxmox VE packages

Make sure you are running the Proxmox VE Kernel, otherwise the installation will fail.

Check the currently active Kernel: 

uname -a
Linux 2.6.32-26-pve ...

Install the Proxmox VE packages: 

apt-get install proxmox-ve-2.6.32 ntp ssh lvm2 postfix ksm-control-daemon vzprocps open-iscsi bootlogd

Accept the suggestion to remove Exim and configure postfix according to your network.

Note: Apache2 is not needed anymore as we use our own web server.

Connect to the Proxmox VE web interface

Connect to the admin web interface (https://youripaddress:8006) and configure the vmbr0 and review all other settings, finally reboot to check if everything is running as expected, or manually edit network config as follows: 

sudoedit /etc/network/interfaces

auto eth0
iface eth0 inet manual

auto vmbr0
iface vmbr0 inet static
        address  192.168.0.100
        netmask  255.255.255.0
        bridge_ports eth0
        bridge_stp off
        bridge_fd 0

Riferimenti

Retrieved from "https://kb.rvmgroup.it/index.php?title=Installazione_di_Proxmox_in_Debian&oldid=9263"